Gianni Industries EM-NH2300 - Manual

Statement
Specification
mounting
plate simplifies the process of installation and
firmly secures the magnet. EM-NH2300M comes
with magnetic bond sensor indicating locked and
unlocked status. EM-NH2300M-TD is equipped
with magnetic bond sensor and relock time delay.
EM-NH2300 is designed for surface mount on
double out-swing doors. Its slide-in
Special Mounting Plate design
EM-NH2300
Double Mini Electromagnetic Lock
Operating Voltage: 12/24 VDC
Current Draw :500mA /12VDCx2 , 250mA/24VDCx2
(at 20ºC)
Operating Temperature : -10 ~55°C (14~131°F)
Humidity: 0~95% non-condensing.
Holding Force: Up to 600 lbs x 2 (272 Kg x 2)
Dimensions:
Magnet:(L) 500, (W) 46, (D) 25 mm
Armature Plate:(L) 185, (W) 38, (D) 12 mm
Mounting Plate:(L) 500, (W) 25, (D) 5 mm
Finishes for magnet and armature plate: Zinc Plated
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight (Approx.): 4.0 Kg
Patent:
ZL 2006 2 0122522.X
Nr. 20 2006 012 052.1
M308308
GB 06 1 6099.8
06 07229 (France)
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EM-NH2300 Ver. G Published on 2011.08.31
GIANNI INDUSTRIES, INC.
Cable
1 . P a s s t h e p o w e r c a b l e
through the mounting plate
and the hole of the maglock.
4.Use the Allen wrench and
fixing screws to tighten the
mounting plate and maglock.
2.Place the mounting plate
above the maglock. Leave a
length of 1 cm from either end
of the maglock.
3.Slide the mounting plate
into the maglocks. Fit the
maglock from the bottom to
the mounting plate.
Regular Installation
Features
Holding force up to 600 lbs x2
MOV provides spike and surge protection
Aluminum anodized casing
Mounting plate & housing for easy installation
Dual voltage 12 or 24 VDC (selectable)
Anti-Residual magnetism function
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw