Gianni Industries EB-262 - Manual (Page 2)

GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.
Fig. A Horizontal Installation (Frame Header)
Fig. B Vertical Installation (Side Jamb)
0 seconds 3 seconds 6 seconds 9 seconds
Relock time setting
The door position sensor can detect within a range of
5mm. If the door gap is too wide, a magnet within the strike
plate of the door can be adjusted to improve detection
accuracy.
45 5 mm maxi
Reed
The brackets UBK-262 are compatible with frameless glass
doors(Fig. C).
Fig. C
UBK-262 Bracket
For 10 or 12 mm thickness of glass
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Horizontal or vertical installation
Long life solenoids
Adjustable Sensor
Positioning Ball
Optional Accessory
The special designed solenoid aims for strength and long
life. The solenoid is guaranteed 500,000 times of operations.
Pull in
Holding
C
u
rr
e
n
t
D
ra
w
(
m
A
)
Time (seconds)
Positioning Ball is installed to prevent the chance of
locking damage caused by the improper door positioning. It
also helps the door align with the drop bolt and reduce the
automatic relock time of dropbolt when the door is closed.
Adjustable Time Delay of 0,3,6,9 seconds with 2 way DIP
switch. (Default Value: 0 sec.)
Relock Time Delay
Energy Saving Design
After the dropbolt is completely locked, the current draw
changes from 0.9A to 0.3A to prolong its life.
GIANNI INDUSTRIES, INC.
EB262 Electric Dropbolt
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EB-262 Ver. G Published on 2011.06.22 No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw