FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 46)

cfgdevice(8)
28 XSCF Reference Manual • Last Revised June 2007
The current status of the drive that is displayed with this command includes the
following types of status information:
The cfgdevice(8) command is valid only for high-end server.
Privileges You must have one of the following privileges to run this command:
■ For connection and disconnection:
platadm , fieldeng
■ For displaying the status:
platadm , fieldeng
Refer to setprivileges(8) for more information.
port_no Port number of the port where the IOUA is installed and that
can be connected to the DVD drive/tape drive unit. It is
displayed in the "IOU number-PCI slot number" format.
IOU/SAS-status Connection status between IOUA and built-in switching unit.
It is changed by specifying "attach" or "detach."
■ enable/disable : Setting status of the cfgdeive(8)
command
enable : Connected with "-c attach."
disable : Not connected.
■ up/down : Logical connection between IOUA and built-in
switching unit.
up : Connected.
down : Not connected.
SAS-status Connection status between I/O unit and the system.
■ enable/disable : Connection setting between I/O unit
and the system. When starting a domain with no I/O unit,
the "disable" may be displayed.
enable : Yes
disable : No
■ up/down : Logical connection between I/O unit and the
system.
up : Connected.
down : Not connected.