FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 137)

resetdateoffset(8)
System Administration 137
NAME resetdateoffset - reset the time subtraction between XSCF and the domain
SYNOPSIS resetdateoffset
resetdateoffset -h
DESCRIPTION The resetdateoffset(8) command resets the time subtraction between XSCF and
the domain, which stored in XSCF.
Usually, the time of the domain is synchronized with the time of XSCF. When the
time of the domain changed by using a command such as the date(1M) which
prepared in the operating system of domain, the time subtraction between the time
of XSCF and the changed time of domain will be stored in XSCF. The stored time
subtraction remains after the domain reboot or after the XSCF reset by using a
command such as the rebootxscf(8), with the result that the time subtraction
between XSCF and the domain remains stored.
The resetdateoffset(8) command resets the every time subtraction between
XSCF and each domain, which stored in XSCF. As a result, the time of domain after
startup will be set to the same time as XSCF.
Privileges You must have platadm or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
The resetdateoffset(8) command needs to be executed in the system power-off
status.
EXAMPLES EXAMPLE 1 Resets the time subtraction between XSCF and the domain.
EXIT STATUS The following exit values are returned:
-h Displays usage statement.
XSCF> resetdateoffset
0 Successful completion.
>0 An error occurred.