FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 302)

showdcl(8)
280 XSCF Reference Manual • Last Revised November 2007
OPTIONS The following options are supported:.
EXTENDED
DESCRIPTION
■ A system board for which the floating board priority is set to a low value is
difficult to use as a floating board. Accordingly, it is difficult for the system
board to affect the domain operation system.
■ The setdcl(8) command sets domain configuration information.
EXAMPLES EXAMPLE 1 Displays detailed information on the DCL that is set for domain ID 0
-a Displays information that is set for all domains.
-d domain_id Specifies the ID of the domain for which information is to be
displayed. The domain_id can be 0–23 depending on the system
configuration.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-l lsb Specifies the LSB number whose information is to be displayed.
Specify an lsb value by using an integer ranging from 0 to 15.
Multiple locations can be specified by delimiting them with
spaces. If lsb is omitted, all the LSBs in the domain are targets.
-v Also displays information on Cfg-policy, No-Mem, No-IO, and
Float
in the DCL.
XSCF> showdcl -d 0
DID LSB XSB Status
00 Running
00 00-0
04 01-0
08 02-0
12 03-0