FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 27)

Intro(8)
System Administration 5
showaudit display the current auditing system state
showautologout display the session timeout time of the XSCF shell
showboards display information on an eXtended System Board (XSB)
showcod display Capacity on Demand (COD) configuration
information
showcodlicense display the current Capacity on Demand (COD) right-to-
use (RTU) licenses stored in the COD license database
showcodusage display the current usage statistics for Capacity on Demand
(COD) resources
showconsolepath display information on the domain console that is currently
connected
showdate show the date and time of XSCF
showdcl display the current domain component list (DCL)
showdevices display current information on an eXtended System Board
(XSB)
showdomainmode display the domain mode
showdomainstatus display the current domain component list (DCL)
showdscp display the IP addresses assigned to the Domain to Service
Processor Communications Protocol (DSCP)
showdualpowerfeed display the current setting of dual power feed mode
showemailreport display the email report configuration data
showenvironment display the intake air temperature and humidity,
temperature sensor information, voltage sensor
information, and fan rotation information about the system
showfru display the hardware settings of specified device
showhardconf display information about field replaceable unit (FRU)
installed in the system
showhostname display the current host name for the XSCF unit
showhttps display the status of the HTTPS service set for the XSCF
network
showldap display the Lightweight Directory Access Protocol (LDAP)
configuration for the Service Processor
showlocale display the current setting for the XSCF locale
showlocator display the state of the CHECK LED on the operator panel