FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 121)

poweron(8)
System Administration 119
NAME poweron - turn on the power to the specified domain
SYNOPSIS poweron [ [-q] -{y|n}] [-M] -d domain_id
poweron [ [-q] -{y|n}] [-M] -a
poweron -h
DESCRIPTION The poweron(8) command turns on the power to the specified domain.
The command can turn on the power to the specified domain or to all domains.
Privileges You must have one of the following privileges to run this command:
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
■ When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
platadm , fieldeng Can run this command for all domains.
domainadm , domainmgr Can run this command only for your managed domains.
-a Turns on the power to every domain that has been completely
set up. Only users who have the platadm or fieldeng
privileges can specify this option. The "domain that has been
completely set up" means a domain that has been completely set
up with the setdcl(8) and addboard(8) commands.
-d domain_id Specifies the ID of the domain to be turned on. domain_id can be
0–23 depending on the system configuration.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-M Displays text by page. This option provides a function that is
the same as that of the more command.
-n Automatically answers 'n' (no) to all prompts.
-q Suppresses all messages to stdout, including prompts.
-y Automatically answers 'y' (yes) to all prompts.