Freescale Semiconductor i.MX27 PDK 1.0 - Manual (Page 20)

i.MX27 PDK 1.0 Hardware User's Guide, Rev. 1.0 Freescale Semiconductor 3-2
3.1 Build a Development Platform: Assemble 3 Boards
This section explains how to connect the Personality, Debug, and CPU boards.
3.1.1 Connect Personality Board to Debug Board
The Personality board connects to the Debug board using a 500-pin connector. The connector is keyed to
avoid misconnection, so there is only one way to connect these boards. Connect the Personality board to
the Debug board. See Figure 3-2.
Figure 3-2 Install Personality Board onto Debug Board