Freescale Semiconductor i.MX27 PDK 1.0 - Manual (Page 16)

Freescale Semiconductor i.MX27 PDK 1.0 Hardware User's Guide, Rev. 1.0 2-5
Component
Identifier
Description
J18
Mini USBOTG High speed connector, for USB HOST connection. NOTE: J18 mini USBOTG
High speed connector, for USB HOST connection.
Note: This connector is not used with the i.MX27 PDK; it is used only with the i.MX31 PDK.
J19 Audio and Video connector
CN13 GPS module connector
CN14 2.0M pixel CMOS sensor connector
CN16 Debug port for Wi-Fi and Bluetooth module
CN70 40 pin ZIF connector for Toshiba HDD
S7 – S17 Onboard keypad
2.2.2 Personality Board Bottom Connectors
Figure 2-4 illustrates the bottom view of the Personality board. Table 2-3 describes the connectors.
Figure 2-4 Personality Board, Bottom View