Fostex LIVE RECORDING MIXER LR16 - Manual (Page 80)

80
Model LR16 [Recorder function / Other functions]
Software version upgrade
When the software version of the LR16 is up-
graded, you can upgrade the LR16 by your-
self. The upgraded software can be down-
loaded via the Fostex website (http://
www.fostexinternational.com/).
Use either of the methods below to upgrade
the software.
The downloaded software file has the ".mot"
extension. See the Fostex website for details
about how to download the file.
Use the "USB" menu in the MENU mode to
connect the LR16 to a personal computer and
transfer the downloaded upgrade file to the
internal hard disk of the LR16. For details
about how to transfer a file, see page 74.
INSERT INSERT INSERT INSERT INSERT INSERT INSERT INSERT
INPUT
AUX SEND (-2dBu) EFF SEND (-2dBu) GROUP (+4dBu)
R STEREO OUT (+4dBu) L ST MIX OUT (-10dBV) USB MIDI OUT FOOT SW CONTROLLER PANEL LOCK
LOCK
PHANTOM POWER
INSERT INSERT INSERT INSERT INSERT INSERT INSERT INSERT
INPUT
AUX SEND (-2dBu) EFF SEND (-2dBu) GROUP (+4dBu)
R STEREO OUT (+4dBu) L ST MIX OUT (-10dBV) USB MIDI OUT FOOT SW CONTROLLER PANEL LOCK
LOCK
PHANTOM POWER
Connect a USB memory stick to a personal
computer and copy the downloaded upgrade
file to the USB memory stick, then connect
the USB memory stick to the [USB HOST] port
of the LR16.
Note that you cannot connect a personal com-
puter to the LR16 while a USB memory stick
is connected to the LR16.
: If you attempt to select the same
destination channels as the memory play
signal, the warning message as below is
shown and you cannot select the chan-
nels.
(3) Use the [MENU] dial to highlight "MemPlay"
item and press the [ENTER] key.
The current setting ("-/-" by default) starts
flashing.
• To assign the destination channels of Memory play
(4) Use the [MENU] dial to select the
destination channels and press the
[ENTER] key.
You can select from channel pairs ("1/2",
"3/4" and "5/6") as well as "-/-".
When "-/-" is selected, no channel is
assigned.
(5) Press the [STOP] key to exit the MENU
mode.
: If you attempt to select the same
destination channels as the SUB IN sig-
nal, the warning message as below is
shown and you cannot select the chan-
nels.
: If you initialize the system
memory via the "Sys default memory"
menu item of the "System" menu, these
items revert back to the default settings.
: If you cannot download the file from
the Fostex website, consult the Fostex ser-
vice station or your nearest dealer.
USB memory stick
Personal computer