Fostex LIVE RECORDING MIXER LR16 - Manual (Page 72)

72
Model LR16 [Recorder functions / Project management]
Deleting a project
You can delete an unnecessary project from
the hard disk.
: You cannot undo deleting a project.
Make sure before deleting a project.
(4) Use the [MENU] dial to select "On" (or "Off")
and press the [ENTER] key to confirm the
setting.
(5) Press the [STOP] key or repeatedly press
the [EXIT/NO] key to exit the MENU mode.
The display returns to the Home screen of
the project.
On the Home screen of a protected project,
the "locked" icon is shown as below.
(1) Press the [ENTER] key to bring up the
MENU screen.
When you bring up the MENU screen for
the first time, "Mark point" is highlighted.
(2) Use the [MENU] dial to highlight "Project"
and press the [ENTER] key.
The display now shows the project menu.
(5) Press any operation key.
The LR16 exit the MENU mode and the
display returns to the Home screen.
Protecting a project
You can protect the current project.
: You cannot execute punch in/out
or additional recording to a protected
project.
(1) Press the [ENTER] key to bring up the
MENU screen.
When you bring up the MENU screen for
the first time, "Mark point" is highlighted.
(2) Use the [MENU] dial to highlight "Project"
and press the [ENTER] key.
The display now shows the project menu.
(3) Use the [MENU] dial to highlight "Protect"
and press the [ENTER] key.
The current protection setting (Off or On)
flashes and you can now change the
setting.
After completing exporting data, the follow-
ing popup appears.