beautypg.com

Rolling back a project – Fostex LIVE RECORDING MIXER LR16 User Manual

Page 67

background image

67

Model LR16 [Recorder functions / Project management]

[MENU] dial

numeric keys

(5)

After editing the name, press the [ENTER]
key.

The display now shows the Home screen of
the renamed project.

[CLEAR] key

The following shows the procedure of com-
pletely deleting "PROJ001", the current
project name, and entering "Live3" as the
new name.

(1) Rotate the [MENU] dial counterclockwise

to move the cursor to the leftmost position.

(2) Press the [CLEAR] key repeatedly until all

characters of the current name are deleted.

(3) Use the "5" key to enter an uppercase "L".

(4) Use the "4" key to enter a lowercase "i".

(5) Use the "8" key to enter a lowercase "v".

(6) Use the "3" key to enter a lowercase "e".

(7) Use the [MENU] dial to move the cursor to

the right.

(8) Use the "3" key to enter a "3".

Rolling back a project

Instead of the undo/redo function, you can
retrieve the pre-edited condition of an edited
project.

:

Each time you perform recording or

editing (including punch-in/out, additional re-
cording, etc.), the LR16 stores the previous
project data as an ADL file to the LOG folder on
the hard disk, as shown below. By selecting a
desired ADL file, you can roll back the project
to the previous condition, which is similar to
the undo function.

(1)

Press the [ENTER] key to bring up the
MENU screen.

When you bring up the MENU screen for
the first time, "Mark point" is highlighted.

(2)

Use the [MENU] dial to highlight "Project"
and press the [ENTER] key.

The display now shows the project menu.

Each ADL file is stored with a different file name
as below.

TAKE01:

ADL file for a newly created
(blank) project.

TAKE02:

ADL file for a project which has
been recorded for the first time.

TAKE03:

ADL file for a project which has
been edited for the first time.

TAKE04:

ADL file for a project which has
been edited for the second time.

The following shows the procedure of replac-
ing the current project (TAKE04) with the pre-
edited project (TAKE02).

LOG Folder

TAKE01

TAKE02

TAKE03

TAKE04