Project management – Fostex LIVE RECORDING MIXER LR16 User Manual

Page 65

Model LR16 [Recorder functions / Project management]

Selecting a project

Project management

You can select the desired project by the fol-
lowing procedure.

(1)

Press the [ENTER] key to bring up the
MENU screen.

When you bring up the MENU screen for
the first time, "Mark point" is highlighted.

(2)

Use the [MENU] dial to highlight "Project"
and press the [ENTER] key.

The display now shows the project menu.

(3)

While "Select" is highlighted, press the
[ENTER] key.

The display now shows the project list.

(4)

Use the [MENU] dial to highlight a desired
project and press the [ENTER] key.

The display now shows the Home screen
for the selected project.

By selecting "" shown at the
bottom of the list, you can create a new
project on the hard disk (see “Creating a
new project" below).

If you select a project which does

not match the setting of the "Default FS"
menu item in the "System" menu of the
MENU mode, the "FS/Bit" information flashes
on the Home screen for warning (the infor-
mation shows the current setting of the "De-
fault FS" menu item).

In such a condition, you cannot perform
playback or recording. To perform playback
or recording, reselect the "Default FS" menu
item to the same FS/Bit as the project (see
page 83 for details about how to set it).

Creating a new project

You can create a new project on the hard disk
by selecting "" shown at the
bottom of the list.

You can make recording to the project

created by the following procedure only in
the insert mode (i.e., the [NEW PROJECT] key
is off).