FUJITSU SRS-1050 - Manual (Page 90)

SRS -1050 Local Features ( Chapter 3
Page 3-36
SUPPORTED (SELECT)
COMPLETED
After about 15 seconds, or if you press asterisk (*), the display returns to the second menu mode screen:
4:UNA 5:H-FREE
6:HAND/HEAD (SELECT 1-14)
3. You can now select a different menu function, or press REG (softkey 4) to return to the normal display:
12:55PM WED MAY 1
Disabling the UNA Feature
To disable unanswered call logging, follow these steps:
1. Press REG (softkey 4), 4, ENTER (softkey 1).
If the following screen appears, the feature is enabled:
UNA SERVICE MODE
SUPPORTED (ALL)
To leave it as is, press REG again.
2. To disable UNA, press ENTER. This screen appears:
1:ALL 2:SELECT
3:NO SUPPORT (SELECT 1-3)
3. Now press 3, ENTER, and this screen appears:
NON SUPPORTED
COMPLETED
After about 15 seconds, or if you press asterisk (*), the display returns to the second menu mode s creen:
4:UNA 5:H-FREE
6:HAND/HEAD (SELECT 1-14)
4. You can then select a different menu function, or press REG (softkey 4) to return to the normal display:
12:55PM WED MAY 1
. . . . . . . . . . . . . . . . . . . . . . . . . . .
The call announce intercom feature is a convenient way for a person screening incoming calls to announce the call
to the intended recipient. The screener places the incoming call on hold, uses a designated Directory Number to
announce the call to the recipient via intercom, and may then transfer the call. The screener can also use this
feature to deliver a message.