FUJITSU SRS-1050 - Manual (Page 46)

SRS -1050 Voice Features ( Chapter 2
Page 2-18
Using REDIAL after lifting the
handset or pressing
SPEAKER
1. If you don't hear a tone, press an
idle Call Appearance button.
2. Press REDIAL. The last number
dialed appears on the display
and is dialed automatically.
HOLD
Retains connection with an
existing call until you can
return to it
HOLD lets you keep a call active
even though you are no longer
directly connected with it. This
feature is useful if you need to
perform some action away from
your phone, such as looking up
some information.
1. To use hold, press HOLD while
you have an active call in
progress. The Call Appearance
LED changes from steady red to
flashing red.
2. To use another Call Appearance
or feature button, press it. The
phone retains each call you
place on hold until you
reconnect with it (or the other
party hangs up). You are now
free to take other actions,
including making and receiving
other calls.
3. To reconnect with a call on hold,
press its flashing Call
Appearance button. Its LED
will changes from flashing red to
steady red, and you are
reconnected in handsfree mode.
(You can use the handset, if you
prefer, by lifting it.)
CONFERENCE 3 parties
Adds a third party to an
existing Call
To use CONFERENC1E (after first
establishing an initial call):
1. Press CONFERENCE. The first
party is automatically placed on
hold, and that Call Appearance's
LED flashes red.
An idle Call Appearance for the
holding Directory Number is
automatically selected, if
available. Its LED turns steady
red and a dial tone sounds.
If that Directory Number has no
idle Call Appearance, press a
Call Appearance of another
Directory Number.
2. Dial the third party, or press any
Call Appearance that is ringing
or on hold except the
conference hold. Converse
privately with the party on that
line.