FUJITSU SRS-1050 - Manual (Page 59)

Chapter 3 ( SRS -1050 Local Features
Page 3-5
RINGER TONE MODE
MEDIUM
4. Press ENTER again and this
menu appears:
1:LOW 2:MEDIUM
3:HIGH (SELECT 1-3)
5. Press the number for the desired
tone.
The phone rings once at the
selected tone. If you don't like
the tone, try a different option.
6. When you hear a tone you like,
press ENTER.
The screen shows your selection
plus the word COMPLETED:
LOW
COMPLETED
7. To return to the normal display,
press REG (softkey 4).
To change another setting, ;you
can press asterisk (*) to return to
the menu mode options.
Selecting Ringer Mode
Select either normal ring or silent
ring. Silent ring flashes the LED
of the receiving Directory Number
or Call Appearance button
without ringing the bell.
1. Press REG (softkey 4), 7, ENTER
(softkey 1). This screen
appears:
RINGER SERVICE MODE
. . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Press ENTER again and this
menu appears:
1:VOLUME 2:TONE
3:RINGING (SELECT 1-4)
3. Press 3, ENTER. A screen
appears showing the current
ringer mode setting:
RINGING MODE
BELL
4. Press ENTER again and this
menu appears:
1:BELL 2:SILENT
(SELECT 1-2)
5. Select 1 for a normal ring or 2 for
a silent ring and then press
ENTER. The screen shows your
selection plus the word
COMPLETED:
SILENT
COMPLETED
6. To return to the normal display,
press REG (softkey 4).