FUJITSU SRS-1050 - Manual (Page 58)

SRS -1050 Local Features ( Chapter 3
Page 3-4
Setting Ringer Volume
To set the ringer volume, follow
these steps:
1. Press REG (softkey 4), 7, ENTER
(softkey 1). This screen
appears:
RINGER SERVICE MODE
. . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Press ENTER again and this
menu appears:
1:VOLUME 2:TONE
3:RINGING (SELECT 1-4)
3. Press 1, ENTER. A screen
appears showing you the
current volume setting:
RINGER VOLUME MODE
MEDIUM
4. Press ENTER again and this
menu appears:
1:SOFT 2:MEDIUM
3:HIGH (SELECT 1-3)
5. Press the number for the desired
volume.
The phone rings once at the
selected volume. If the volume is
too loud or too soft, try a different
option.
6. When you hear a volume you
like, press ENTER.
The screen shows your selection
plus the word COMPLETED:
MEDIUM
COMPLETED
7. To return to the normal display,
press REG (softkey 4).
To change another setting, you
can press asterisk (*) to return to
the menu mode options.
Setting Ringer Tone
To set the ringer tone, follow
these steps:
1. Press REG (softkey 4), 7, ENTER
(softkey 1). This screen
appears:
RINGER SERVICE MODE
. . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Press ENTER again and this
menu appears:
1:VOLUME 2:TONE
3:RINGING (SELECT 1-4)
3. Press 2, ENTER. A screen
appears showing you the
current tone setting: