FUJITSU SRS-1050 - Manual (Page 57)

Chapter 3 ( SRS -1050 Local Features
Page 3-3
Whenever REG is pressed, it
either enters or exits menu mode,
no matter what else may be in
progress.
Note: If you enter menu mode
during a call, special features
such as Call Pickup and Call
Forwarding are temporarily
disabled. However, regular
calling controls such as
HOLD, SPEAKER, MIC-OFF,
and call disconnection remain
available.
Once you are familiar with the
menu choice numbers, you
can go directly to the one you
want after pressing REG. For
example, you can abbreviate
the key sequence REG NEXT
7 ENTER to REG 7 ENTER,
getting to the RINGER screen
without displaying the other
menus shown above.
Notes on Entering
Information
When the displayed entry is
acceptable, press ENTER to retain
it and display the next parameter
screen.
To change a numerical entry (not
including menu selections) before
you press ENTER, press CLEAR
(softkey 3) and enter the desired
value.
To change a menu selection or a
numerical entry after you press
ENTER, press asterisk (*). In
some cases, this returns you to
the preceding data entry screen,
where you can enter the correct
information. In other cases, you
return to the menu mode main
menu and must redo the
procedure from there.
CHANGING RINGER MODE
This local feature allows you to:
•
Change the volume and tone
of the ringer
•
Select the ringer mode, either
normal ring or silent ring.
Silent ring causes the LED to
flash green the LED of the
receiving Call Appearance
button without any ringing
sound
•
Select the ringing pattern you
will hear when you are
conversing on another line
All settings are made from item 7,
RINGER, in menu mode. After
completing a setting, you can
press asterisk (*) to return to the
menu mode options and change
another setting, or you can press
REG (softkey 4) to return to the
normal display.