FUJITSU SRS-1050 - Manual (Page 84)

SRS -1050 Local Features ( Chapter 3
Page 3-30
If you wish to reactivate MIC-
OFF, you must first cancel the
one-touch assignment on button
18.
3. To activate MIC-OFF, press 1,
ENTER.
To deactivate MIC-OFF, press
2, ENTER.
The screen shows your choice:
SUPPORTED
COMPLETED
4. To return to normal operations,
press REG (softkey 4). The
standard display screen
appears.
CORRECTING MISTAKES
This section gives an example of
correcting errors while setting a
local feature of the SRS-1050.
Notes on Entering
Information
When the displayed entry is
acceptable, press ENTER to retain
it and display the next parameter
screen.
To change a numerical entry (not
including menu selections) before
you press ENTER, press CLEAR
(softkey 3) and enter the desired
value.
To change a menu selection or a
numerical entry after you press
ENTER, press asterisk (*) to
return to the menu and then enter
the correct value.
Example: Correcting
calendar/clock errors
Suppose, just before entering the
number for the day, you
discovered a couple of errors;
you had set AM instead of PM
and APRIL instead of MAY.
Here's what you do:
1. The screen shows the following:
INPUT DAY ->
12:55AM '93 APRIL 30
2. Press asterisk (*). The prior
screen appears:
INPUT MONTH ->
12:55AM '93 APRIL 30
3. Press * again. The prior screen
appears:
INPUT YEAR ->
12:55AM '93 APRIL 30
4. Press * again. The prior screen
appears:
INPUT 0:AM 1:PM ->
12:55AM '93 APRIL 30