FUJITSU SRS-1050 - Manual (Page 78)

SRS -1050 Local Features ( Chapter 3
Page 3-24
1. Press ENTER. If one or two way
intercom is enabled, the screen
displays the enabled mode plus
the authorized Directory
Number, as shown below:
INTERCOM FEATURE (1)
TWO WAY INTERCOM SUPPORTED
985*3112
If no telephone numbers have
been programmed in, the Call
Announce Intercom feature is
disabled, and the screen displays
NON SUPPORTED:
INTERCOM FEATURE (1)
NONSUPPORTED
To program the first number and
enable Call Announce Intercom,
go to step 2.
2. Press ENTER. The Call
Announce Intercom selection
screen appears:
1:ONE WAY INTERCOM 2:TWO WAY
INTERCOM
3: TURN OFF INTERCOM SELECT ITEM
(1-3)
3. To enable the intercom feature,
dial 1 or 2 and press ENTER. A
screen appears showing your
choice and prompting for an
authorized Directory Number:
TWO WAY SELECTED (1)
ENTER AUTHORIZED TELEPHONE
NUMBER