FieldServer Envirotronics SystemsPlus FS-8700-88 - Manual (Page 34)

FS-8700-88 Envirotronics SystemsPlus Page 34 of 49
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
4.4.84. Map Descriptor Example 80 - edit set gsoak channel = value
// Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, SysPlus_Cmd, Par_Data_Array_Name, Par_Data_Array_Offset, Length
Ed_Set_Gsoak, Par_Val_Trigger, 1, awt, SYSPLUS_01, Ed_Set_Gsoak, Ed_Set_Gsoak, 0, 1
This command is used by first writing the parameter data value and then triggering the command by writing channel to
Data_Array_Name at Data_Array_Offset.
Parameter data setup:
Offset from par_data_array_offset Description
0
Value
4.4.85. Map Descriptor Example 81 - edit set gsoak enabled channel = Boolean
// Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, SysPlus_Cmd, Par_Data_Array_Name, Par_Data_Array_Offset, Length
Ed_Set_Gs_Ena, Par_Val_Trigger, 2, awt, SYSPLUS_01, Ed_Set_Gsoak_Ena, Ed_Set_Gs_Ena, 0, 1
This command is used by first writing the parameter data Boolean and then triggering the command by writing channel to
Data_Array_Name at Data_Array_Offset.
Parameter data setup:
Offset from par_data_array_offset Description
0
Boolean