Fluke 1595A - Manual (Page 109)

99
Remote Operation
Interface Commands
8.7.3.120 SYST:PASS:CEN:STAT?
Returns the password-access state. The response is 0 if access is disabled and 1 if access is enabled.
8.7.3.121 SYST:PASS:GROU:MEAS
Query form: SYST:PASS:GROU:MEAS?
Password protection: unconditional
Alternate parameter: DEF
Sets the password Measure Protection setting (see Section 5.7.7.1, PASSWORD (F4), on page 54). When
Measure Protection is on, settings related to measurement, and their associated commands, are protected.
8.7.3.122 SYST:PASS:GROU:PROB
Query form: SYST:PASS:GROU:PROB?
Password protection: unconditional
Alternate parameter: DEF
Sets the password Probe Protection setting (see Section 5.7.7.1, PASSWORD (F4), on page 54). When
Probe Protection is on, settings related to probe definition, and their associated commands, are protected.
8.7.3.123 SYST:PASS:GROU:RES
Query form: SYST:PASS:GROU:RES?
Password protection: unconditional
Alternate parameter: DEF
Sets the password Resistor Protection setting (see Section 5.7.7.1, PASSWORD (F4), on page 54). When
Resistor Protection is on, settings related to resistor definition, and their associated commands, are protected.
8.7.3.124 SYST:PASS:GROU:TIME
Query form: SYST:PASS:GROU:TIME?
Password protection: unconditional
Alternate parameter: DEF
Sets the password Time/Date Protection setting (see Section 5.7.7.1, PASSWORD (F4), on page 54). When
Time/Date Protection is on, setting the time and date is protected.
8.7.3.125 SYST:PASS:NEW ,
Example command: SYST:PASS:NEW 1234,9999
Changes the password. If is incorrect, error -221,“Settings conflict” is generated in the
error queue.
8.7.3.126 SYST:PON:MIN?
Returns the time in minutes since power on.
8.7.3.127 SYST:TIME ,,
Query form: SYST:TIME?
Example query response: 23,59,59
Password protection: Time/Date Protection
Sets the Time of the system clock.
8.7.3.128 SYST:TIME:DAYL OFF|NAM|EUR
Example command: SYST:TIME:DAYL NAM