FUJITSU IMAGE FI-5530C2 - Manual (Page 96)

80
4. Mark the [Split Image] checkbox.
5. Click the [OK] button.
⇒ You are returned to the [TWAIN Driver] dialog box.
6. In the [TWAIN Driver] dialog box, click the [OK] button.
⇒ Changes made are saved and the [TWAIN Driver] dialog box closes.
Continue scanning in ScandAll PRO.
For information about how to scan documents, refer to section
"1.5 How to Use ScandAll
PRO" on page 29 .
HINT
When a double-sided document is scanned in Duplex mode, the
scanned document image is output according to the [Flip Side
Rotation] setting in the order presented below:
• Book: Upper half D Lower half
• Fanfold: Lower half D Upper half
ATTENTION
If one of the following settings is set, this function is not available.
1. Multi Image Output ( page 74 )
2. Color/Monochrome Auto Detection ( page 77 )
3. The resolution is set to 1200dpi