FUJITSU IMAGE FI-5530C2 - Manual (Page 124)

108
10. Reset the pick counter.
1) When turning on the power, check that the scanner is connected to your personal
computer.
2) Open the [Scanners and Cameras] from the control panel of your personal
computer.
3) Open the [Properties] of [fi-5530C2dj] from the [Scanners and Cameras].
⇒ The [Properties of fi-5530C2dj] dialog box is displayed.
4) Click the [Device Set] tab.
⇒ The following window appears.
5) After clicking the [Clear] button beside [Pick Roller] in [Page Counter], click the
[OK] button.
⇒ The following window appears.
Click the [OK] button.
The Pick roller counter returns to "0".