FUJITSU IMAGE FI-5530C2 - Manual (Page 21)

1.1 Turning the Scanner ON
fi-5530C2 Image Scanner Operator’s Guide
5
B
A
S
IC SCANNE
R OP
ERA
T
IONS
1
■ Power Save Mode
The Power Save mode keeps the scanner in a low-powered state if no operation is performed on the
scanner for 15 minutes after it has been turned on. The scanner is automatically switched to the
Power Save mode.
In the Power Save mode, the indication of the Function Number Display on the operator panel goes
out, while the green LED is kept lit.
To return the scanner from the Power Save mode, perform one of the following operations:
• Place documents on the ADF paper chute.
• Press any button on the operator panel.
The scanner will be turned off when pressing down the power button for 2 seconds or
longer.
• Execute a command from the scanner driver.