FUJITSU IMAGE FI-5530C2 - Manual (Page 94)

78
⇒ The [Multi Image] dialog box appears.
3. Select [Auto Color Detection] under [Output mode].
4. Under [Select Current Image Setting], select a side, and then configure settings for
each side in the [TWAIN Driver] dialog box.
5. In the [TWAIN Driver] dialog box, click the [OK] button.
⇒ Changes made are saved and the [TWAIN Driver] dialog box closes.
Continue scanning in ScandAll PRO.
For information about how to scan documents, refer to section
"1.5 How to Use ScandAll
PRO" on page 29 .
ATTENTION
When scanning in duplex mode, the same [Image Mode] must be selected
for both the front and back sides.