FUJITSU IMAGE FI-5530C2 - Manual (Page 152)

136
ATTENTION
This scanner can scan ID cards through the Automatic Document Feeder
with the following precautions.
• Place one card at a time into the Auto Document Feeder.
• ID card feeding requires the card to be fed through the Auto Document
Feeder in portrait mode as in the following figure.
• Smooth cards should be placed face down in the Auto Document Feeder.
• The card to be scanned should be within the ISO7810 compliance, type
ID-1.
ISO7810-compliant, Type ID-1 card
Material: PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate)
Dimensions: 3.4 inch (height) x 2.1 inch (width) / 86 mm x 54 mm
Thickness: 0.03 ± 0.003inch / 0.76 ± 0.08mm
• Embossed cards (on which a raised effect is created) cannot be scanned.
• Cards that are excessively rigid or less flexible may not feed smoothly
and excessive noise may occur.
• Cards should be clean from oil and without labels.
• Cards cannot be scanned when the imprinter is installed.
POR
TRAIT
LANDSCAPE