Fortinet FortiGate Voice 4.0 MR1 - Manual (Page 58)

config system interface FortiGate Voice VoIP, PBX, and PSTN CLI Reference
FortiGate Voice Version 4.0 MR1 Administration Guide
58 01-410-112851-20100601
http://docs.fortinet.com/ • Feedback
config system interface
Use this command to allow traffic for the VoIP protocol, SIP, to flow on a specific interface.
Syntax
config system interface
edit
set voip {enable | disable}
end
execute pbx
Use this command to view active channels and to delete, list or upload music files for
when music is playing while a caller is on hold.
Syntax
execute pbx active-call
execute pbx extension
execute pbx music-on-hold {delete | list | upload}
execute pbx prompt upload ftp
[:port] [] [password>]
execute pbx prompt upload tftp
[:port] [] [password>]
execute pbx prompt upload usb
[:port] [] [password>]
execute pbx restore-default-prompts
execute pbx sip-trunk list
busy-tone-length
Enter a number that determines how logn the busy tone is
on.
No
default
busy-quiet-length
Enter a number that determines how long the busy tone is
off.
No
default
codec {alaw | ulaw} Enter the Codec preference type based on the country. No
default
Variables Description Default
Variables Description Default
edit
Enter the interface that you want to allow SIP traffic on. No
default
voip
{enable | disable} Enable the VoIP SIP protocol for allowing SIP traffic on the
interface.
disable
Variables Description
active-call Enter to display a list of the active calls being processed by the
FortiGate Voice unit.
extension Enter to display the status of all extensions with SIP phones that have
connected to the FortiGate Voice unit.