Fortinet FortiGate Voice 4.0 MR1 - Manual (Page 56)

config pbx voip-provider FortiGate Voice VoIP, PBX, and PSTN CLI Reference
FortiGate Voice Version 4.0 MR1 Administration Guide
56 01-410-112851-20100601
http://docs.fortinet.com/ • Feedback
Syntax
config pbx voip-provider
edit
set user
set domain { |
set secret
set authuser
set display-name
set reigstration-interval
set account-type {static | dynamic}
set port
set dtmf-method {auto | inband | info | rfc2833}
set codec {alaw | g729 |none | ulaw}
set codec1 {alaw | g729 |none | ulaw}
set codec2 {alaw | g729 |none | ulaw}
end
Variables Description Default
edit Enter the VoIP provider’s name. No
default
user Enter the user name for the provider. You can enter
the phone number registered with this provider
instead.
No
default
secret Enter the password associated with the provider. No
default
domain
{_ipv4> |
The VoIP provider’s domain name or IP address. For
example, 172.20.120.11 or voip.example.com.
No
default
authuser Enter the authentication user for the account. No
default
display-name
Enter the name that will be used as the caller ID name
if the provider supports this feature.
No
default
reigstration-interval
Enter a number for the refresh interval. No
default
account-type
{static | dynamic} Enter to define the type of account. No
default.
port Enter the port that the provider will be using. No
default
dtmf-method {auto |
inband | info |
rfc2833} Enter the DTMF method that will be used. No
default
codec {alaw | g729
|none | ulaw} Enter the most preferred Codec for the VoIP provider. ulaw
codec1 {alaw | g729
|none | ulaw} Enter the second most preferred Codec for the VoIP
provider.
none
codec2 {alaw | g729
|none | ulaw} Enter the third most preferred Codec for the VoIP
provider.
none