Fortinet FortiGate Voice 4.0 MR1 - Manual (Page 41)

FortiGate Voice web-based manager configuration reference PBX configuration
FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601
41
http://docs.fortinet.com/ • Feedback
Figure 10: Configuring a dial plan
Go to PBX > Calling Rules > Dial Plan to add a dial plan.
General dial plan list settings
Create New
Select to configure a dial plan. You can add multiple dial plans and assign them
to different extensions. For example, you might want to have a dial plan that
allows long distance calls and a dial plan that does not.
Name The name of the dial plan.
# of Entries The number of entries in each dial plan.
Comments An optional description of the dial plan.
Dial plan rule configuration settings
Name
Enter a descriptive name for the dial plan rule.
Use Default
Outgoing
Prefix("9") Select this checkbox if the dial plan rule should use the default outgoing prefix
(usually 9).
Outgoing Prefix If you clear the Use Default Outgoing Prefix checkbox you can enter a different
outgoing prefix for this dial plan.
Phone number
Begin with Enter the leading digits of the phone number that this dial plan rule should match
with. For example, a dial plan rule for toll free numbers in North America should
begin with 18. The FortiGate Voice uses a best match to match a dialed number
with a dial plan. So each dial plan should have a different Phone number Begin
with setting. But you should plan your dial plan to make sure that unexpected
matches do not occur.