Configuring pbx settings – Fortinet FortiGate Voice 4.0 MR1 User Manual
Page 45
FortiGate Voice web-based manager configuration reference
PBX configuration
FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601
45
end
end
Configuring PBX settings
Configure PBX system settings that affect the overall performance of the PBX service and
all of the users of it. Settings include the extension pattern for the PBX, the outgoing dial
prefix and the email server to use for sending voicemail notification email messages.
Usually you would configure these settings once and rarely thereafter.
To configure PBX settings group, go to PBX > Calling Rules > Setting, make configuration
changes as required and then select Apply.
Figure 12: Configuring PBX settings
PBX Global Settings
Extension Range
Enter a pattern that defines the valid extensions that can be added to the
FortiGate Voice configuration. The pattern can include numbers that must be
in every extension and upper case Xs to indicate the number of digits. The
extension range can only contain numbers and the letter X.
•
If you add numbers to the extension range, all extensions added to this
FortiGate Voice unit must include the same numbers in the same location
in the extension number. For example, if you include a 6 as the first digit,
all extensions added this FortiGate Voice unit must begin with the number
6.
•
The Xs indicate the number of digits in addition to the required number
that each extension must have. For example, 6XXX indicates the
extensions must start with the number 6 and be followed by any three
numbers.
Usually you would add one or two numbers to the start of the extension range
to identify the extensions for this PBX and follow this with enough Xs to be
able to add the required number of extensions.
The extension range should not begin with the same number as the outgoing
prefix.
Country Code
Enter the international country calling code for the country or region in which
you are installing the FortiGate Voice unit.
Local Area Code
Enter the local area code for the country or region in which you are installing
the FortiGate Voice unit.