Fortinet FortiGate Voice 4.0 MR1 - Manual (Page 50)

config pbx did FortiGate Voice VoIP, PBX, and PSTN CLI Reference
FortiGate Voice Version 4.0 MR1 Administration Guide
50 01-410-112851-20100601
http://docs.fortinet.com/ • Feedback
config pbx did
Use this command to configure Direct Inward Dialing (DID). DID allows calls from external
phone systems to dial directly to extensions added to the FortiGate Voice unit.
Syntax
config pbx did
edit
set external-line {fxo1 | fxo2 | fxo3 | fx04 |
}
set cid-number
set extension
set comment
end
Variables Description Default
edit
Enter the name for the dial plan. If you entering an existing
dial plan, select Tab to get to the dial plan that you want to
edit.
No
default
comments
Optionally enter a description of the dial plan. No
default
config rule Configure a new dial plan rule. No
default
edit Enter the name of the dial plan rule to configure. No
default
action {allow |
block} Set the action to allow if this dial plan rule should allow a
call. Set the action to block if the dial plan should block a
call. For example, if you want to block international calls
you could set the Phone Number begin with to 011 and set
the action to block.
No
default
callthrough {fxo1 |
fxo2 | fxo3 | fx04 |
} Select one or more destinations that the dial plan rule
sends outgoing calls to. fxo1, fxo2, fxo3, and fx04 are
the 4 PSTN interfaces. are the VoIP
providers added to the FortiGate Voice. A dial plan rule
can send calls to one or more destinations.
No
default
outgoing-prefix
If you set use-global-outgoing-prefix to no you
can enter a different outgoing prefix for this dial plan.
null
phone-no-beginwith
Enter the leading digits of the phone number that this dial
plan rule should match with. For example, a dial plan rule
for toll free numbers in North America should begin with
18. The FortiGate Voice uses a best match to match a
dialed number with a dial plan. So each dial plan should
have a different Phone number Begin with setting. But you
should plan your dial plan to make sure that unexpected
matches do not occur.
null
prepend
Add digits that should be prepended or added to the
beginning of the dialed number before the call is
forwarded to its destination. You can prepend digits at the
beginning of a call of special dialing is required to reach
and external phone system.
null
use-global-
outgoing-prefix {no
| yes} Select yes if the dial plan rule should use the default
outgoing prefix (usually 9). Select no to add a different
outgoing-prefix.
yes