Fortinet FortiGate Voice 4.0 MR1 - Manual (Page 35)

FortiGate Voice web-based manager configuration reference Configuring PSTN interfaces
FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601
35
http://docs.fortinet.com/ • Feedback
Figure 6: Configuring PSTN interfaces
General PSTN interface settings
Column Settings
Select to add or remove columns. This changes what information
appears.
Name The name of the PSTN interface.
Phone Number The phone number that is associated with that PSTN interface.
Display Name The name that displays on the phone’s LCD.
Administrative Status Status of the PSTN interface. A red down arrow indicates that the
interface is down; a green up arrow indicates that the interface is up.
Catch Caller ID If enabled, a green checkmark appears. If Catch Caller ID is disabled,
a gray X appears.
PSTN interface configuration settings
Basic Options
The basic options for the interface.
Name The name of the PSTN interface.
Phone Number Enter the phone number of the PSTN phone line as provided by your
phone service provider.
The phone number is used for caller ID for calls from the FortiGate
Voice unit to the PSTN. It can be any number, but is usually the actual
phone number of the PSTN line connected to the fxo1 interface. Area
code and country codes are optional.
Display Name This name is used for caller ID for calls from the FortiGate Voice unit
to the PSTN. It can be any name, such as a company name, that
identifies the branch office.
Caller ID Options Configure the following options to support caller ID functions for calls
from the internal network to the PSTN.
Edit