Fortinet FortiGate Voice 4.0 MR1 - Manual (Page 55)

FortiGate Voice VoIP, PBX, and PSTN CLI Reference config pbx voice-menu
FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601
55
http://docs.fortinet.com/ • Feedback
config pbx voice-menu
Use this command to configure the menu that callers will access when they call. The
variable config press- configures the settings for the type of ring group and
the type of group associated with that number.
Syntax
config pbx voice-menu
set comment
config [press-0 | press-1 | press-2 | press-3 | press-4 |
press-5 | press-6 | press-7 | press-8 | press-9]
set type {directory | none | ring-group | voicemail}
set ring-group
end
end
config pbx voip-provider
Use this command to configure the VoIP provider for the PBX.
Variables Description Default
port
Enter the port number that the email server uses for
SMTP.
25
server
address> Enter the email server IP address or domain name. No
default
authenticate
{enable | disable} Select enable if the email server requires authentication.
If you enable authentication you must also add a
username and password.
disable
password
Enter the password for the account on the email sever.
username
Enter a valid username for an account on the email server. No
default
Variables Description Default
comment
Enter a description of the voice-menu settings, if
applicable.
No
default
config [press-0 |
press-1 | press-2 |
press-3 | press-4 |
press-5 | press-6 |
press-7 | press-8 |
press-9] Use this command when configuring what action each
number on the phone’s keypad will take.
For example, you want the personnel directory to come up
every time someone presses 1; config press-1
variable would have the type directory selected in
type.
No
default
type {directory |
none | ring-group |
voicemail} Enter the type of action that is associated with the specific
number on the phone’s keypad. For example, the office
phone directory is heard when a caller presses 0 because
config press-0 has directory as its type.
No
default
ring-group Enter to include a specific ring-group if you have select
ring-group in type. This variable appears only when
ring-group is selected in type.
No
default