Foundry Networks AR1202 - Manual (Page 47)

Specifications
June 2004 © 2004 Foundry Networks, Inc. A - 7
MIBs
Foundry systems support standard and enterprise MIBs. The following tables provide information about supported
MIBs.
5 Ground 7
6 TxD 2
7 no connection -
8 no connection -
Table A.11: Standard MIBS
Standard MIB Description
RFC 1213 Standard MIB-II objects.
The following groups or variables are not supported for this MIB:
• egp
• at
RFC 1315 MIB objects for frame relay DTE interface.
The following SNMP SET operation variables on frDlcmiTable are not
supported for this MIB:
• frDlcmiAddress
• frDlcmiAddrsssLen
• frDlcmiMaxSupportedVCs
• frDlcmiMulticast
RFC 1403 Defines the interoperability of using BGP as the border gateway routing
protocol and OSPF as the interior gateway routing protocol.
RFC 1406 MIB objects for DS1 interface.
The following Far End tables are not supported for this MIB:
• dsx1FarEndCurrentTable
• dsx1FarEndIntervalTable
• dsx1FarEndTotalTable
RFC 1643 MIB objects for Ethernet-like interface.
The following variables are supported for this MIB:
• dot3StatsFCSErrors
• dot3StatsDeferredTransmissions
• dot3StatsFrameTooLongs
The remainder are not supported.
Table A.10: DB-25 to RJ-45 Modem Adapter Pinouts
RJ-45 Pin Signal DB-25 Pin