Foundry Networks AR1202 - Manual (Page 40)

Foundry AR-Series AR1202 and AR1204 Installation Guide
4 - 12 © 2004 Foundry Networks, Inc. June 2004
The following text is output to the terminal:
Set the target name. Press the Enter key.
The following text is output to the terminal:
The name that you use to configure the Foundry router will become the system prompt.
Ensure that the startup script parameter is blank. The “other” parameter may be blank or left as “inPci.”
After entering all the parameters described above, the Foundry boot prompt, “[Foundry Boot]” is displayed.
18. Verify that the settings are correct. Press the Enter key to display the following text:
19. Type @ and press the Enter key to boot from the network.
20. Download the new images. Refer to “Upgrading Software” on page 4-9.
flags [f] : Ox8a
target name [tn] :T1200
[Foundry Boot]: P
boot device : InPci
unit number : 0
processor number : 0
host name : host
file name : tftpdir/8.0/T2000.Z
1net on ethernet [e] : 10.1.0.1:fff0000
host 1net [h] : 10.11.12.13
gateway 1net [g] : 111.2.3.254
user [u] : wind
ftp password [pw] : ****0
flags [f] : 0x8a
target name [tn] : T1200
ether [e] : InPci