The scanning performance is optimized at higher resolution settings by installing additional memory boards. Additionally, with added memory
boards, scanning both sided color sheets at 401 dpi or at higher resolutions will not be suspended or interrupted.

1. Remove the screws on the rear side of the scanner, and remove the covers.

2. Insert the memory boards into the slots and push it down so that the boards are fixed in by the claws.

3. Secure the screws to fix the covers.

The following memory boards are recommendable for using with fi-5650C Color Image Scanner.

Manufacturer

Model

Memory Size

Micron Technology

MT4LSDT1664HG-13E

128MB

Micron Technology

MT8LSDT3264HG-13E

256MB

ATTENTION

Install 2 memory boards whose specifications must be equal, otherwise this option might not operate correctly.

HINT

To confirm the instalation of the extended memory board, check the scanner memory value of [standard information] on [Device information]
panel in [Software operation panel].