FUJITSU LT800P - Manual (Page 79)

77
U s i n g t h e W i r e l e s s L A N
3. Right click the [Local Area Connection], then click [Properties] from the menu
that appears. [Local Area Connection Properties] appears.
4. If [File and Printer Sharing for Microsoft Networks] is displayed in the list, make
sure that it is checked. If it is not checked, check it and click [OK]. You do not have
to perform the following steps. Go to the next section, entitled “Sharing Files.”
If [File and Printer Sharing for Microsoft Networks] is not found in the list, click
[Install], and perform Step 5 and subsequent steps. When you click [Install], the
[Select Network Component Type] window appears.
5. Perform the following steps.
■ Click [Service].
■ Click [Add]. The [Select Network Service] window appears.
6. Perform the following steps.
■ Click [File and Printer Sharing for Microsoft Networks].
■ Click [OK]. You will go back to [Local Area Connection Properties], and [File and
Printer Sharing for Microsoft Networks] is added to the list.
7. Click [OK].
Sharing Files 4
The following example shows how to set sharing the “Work” folder on the c: drive.
1. On the desktop, double-click [My Computer]-> C: drive.
2. Right-click the “Work” folder, then click [Sharing] from the menu. The [Work
Properties] window appears.
3. Click [Share this folder] and set necessary items, as indicated in Table 5.
More than one network adapter is installed in your system if more than
one [Local Area Connection] entry is displayed. In this case, select the
[Local Area Connection] entry with [Intersil PRISM Wireless LAN PCI Card]
displayed under [Device Name].
If you have changed the setting, [Close] is shown instead. Click [Close].
58-0867-01.book Page 77 Thursday, February 13, 2003 1:18 PM