FUJITSU LT800P - Manual (Page 55)

53
H a r d w a r e S p e c i f i c a t i o n s
Stylistic LT800P Hardware Specifications
The following table provides general hardware specifications of the Stylistic LT800P
by category.
Stylistic LT800P Tablet Specifications 2
Physical Specifications
Dimensions 9.6” w x 6.3” d x 1.1” h (244mm x 160mm x 28mm)
Weight 2.70 lb. (1.22 kg) with 6 cell battery
Processing Specifications
CPU Ultra low voltage (ULV) Mobile Intel Pentium III processor - M
with enhanced SpeedStep technology, 866/400 MHz
Chip set Intel 830MG
Memory/Storage Specifications
Main RAM 256MB or 512MB, single slot, 3.3V SDRAM
L1 cache (CPU) 32 KB on die
L2 cache (CPU) 512 KB on die
BIOS ROM 1 MB (FWH - firmware hub)
Hard disk drive • 2.5” HDD
• 40GB IDE HDD
• Shock-mounted
Input/Output Specifications
Digitizer Resistive, with palm rejection
VRAM Intel 830MG chipset with 8MB shared memory using Unified
Memory Architecture (UMA) delivers low-power, high-
performance 3D/2D graphics, video, and display capabilities.
Dynamic Video Memory Technology (DVMT) dynamically
responds to application requirements and efficiently allocates
the proper amount of memory (48MB max.) for optimal
graphics and system performance.
58-0867-01.book Page 53 Thursday, February 13, 2003 1:18 PM