FUJITSU M4099D - Manual (Page 61)

5-10
Symptom
6
The CHECK lamp blinks.
Action depends on the displayed message:
SF2 (SF3) did not detect leading (trailing)
edge of paper
Remove paper and clear the sensors.
Hopper empty
Set the document.
Cover open
Close the side cover.
Close the Endorser cover.
Mis-pick
Go to Symptom 7.
Pick roller unit not set
Set the pick roller unit.
Hopper overload
Reduce document stack in hopper.
Turn the power off once and
on again.
Contact a manufacturer’s authorized
service center.
Does the CHECK
lamp still blink?
YES
NO
End
CHECK
CHECK
Operator panel