FUJITSU M4099D - Manual (Page 21)

2-4
When “Hopper empty” is
displayed, press
CANCEL
.
Place the same cleaning sheet
on the hopper table with the
adhesive side up by aligning with
the hopper guide (right). Then
press ENTER ; the cleaning
sheet is fed.
When “Hopper empty” is
displayed, press
CANCEL
.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Remove the protective paper from a new cleaning sheet and place it with the
adhesive side face down. Then repeat steps through . After cleaning is
complete, turn the power off.
Cleaning sheet
Front
Hopper guide (right)