Symptom2, Symptom – FUJITSU M4099D User Manual

Page 57

Text mode
Original mode

5-6

Symptom

YES

Are the documents loaded

properly? (Straight edge,

no dogear, no bend

corners, staples)

Is the interface cable
connected properly?
Or is the baud rate
correct?
(Video, RS-232C, or
SCSI interfaces)

Load the documents properly.
(See p1-5)

Connect the interface cable
properly.
Or set the correct baud rate.

Read processing does not start.

Interface cable

Turn the power off and on to check if read
processing starts.
When read processing does not start, contact a
manufacturer’s authorized service center.

CHECK

Operator panel

POWER

Does the CHECK lamp

blink?

Messages and Actions
(See p5-13)

Operator panel

Document