FUJITSU M4099D - Manual (Page 51)

4-2
Improving Paper Separation
This section explains adjustment for making paper separation stable.
If the following errors frequently occur, make the adjustments explained below.
• Double feed
• Mis-pick
• SF2 did not detect leading edge of paper
Select “Paper Separation Level” in setup mode and adjust the braking power
of the brake roller.
Setting
Thick
Medium
Thick
Normal
Medium
Thin
Thin
Select “Picking Speed” in setup mode and adjust the rotational speed of the
pick roller.
Braking power
Strong
Less strong
Medium
(factory default)
Less weak
Weak
“Double feed”
frequently occurs.
“Mis-pick” or “SF2 ···”
frequently occurs.
Make the braking
power stronger. Make the braking
power weaker.
Picking speed
Fast
(factory default)
Slow
“Mis-pick” frequently occurs.
Make the picking
speed slow.
NOTE
Processing of scanning in 200 dpi is reduced when the picking speed is set “Slow”.