FUJITSU M4099D - Manual (Page 30)

2-13
WARNING
Wait at least 3 minutes after turning off the power before cleaning.
ACHTUNG
Warten Sie nach dem Reinigen mindestens 3 Minuten bevor Sie den
Scanner wieder anschalten.
■ SF2 Sensors
Wipe the SF3 sensors surface
with a dry cloth or a cotton swab
(or moistened with isopropyl
alcohol as necessary).
Wipe the SF2 sensors in the
transport path with a dry cloth (or
moistened with isopropyl alcohol
as necessary).
■ SF3 Sensors
Open the upper transport unit.
Close the upper transport unit.
Open the upper transport unit.
Close the upper transport unit.
SF3 sensors
(located at upper and lower sides)
SF2 sensors
(located at upper and lower sides)