FUJITSU M4099D - Manual (Page 29)

2-12
■ Document Width Detection Sensors
(Eight positions for upper and lower sides respectively)
Open and hold the ADF sheet
guide assembly.
Wipe the eight sensor surfaces
with a dry cloth (or moistened with
isopropyl alcohol or cleaner F1 as
necessary).
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Close the upper transport unit.
Close the ADF sheet guide
assembly.
Open the upper transport unit.
Sensors
ADF sheet guide assembly
SF2 sensor (inside)
Document width detection sensors
(inside)
Document width detection sensors (lower)
Document width detection sensors (upper)
ADF release levers
WARNING
Wait at least 3 minutes after turning off the power before cleaning.
ACHTUNG
Warten Sie nach dem Reinigen mindestens 3 Minuten bevor Sie den
Scanner wieder anschalten.