FUJITSU M3091DC - Manual (Page 37)

C Note
- The copy count and copy gray level can also be adjusted with MCopy. If MCopy is used, set the copy
count display panel to "C" with the copy count setting switch and then press the copy button. For details,
refer to MCopy online help.
C Precautions
The entire page may not be printed depending on the size of the printer's printable area. To print the
entire page in a document, do the following:
a) Display the MCopy screen. Press the copy count setting switch to display "C" on the copy count
display panel, and then press the copy button.
b) Check the "Fit to printable area" check box on the MCopy screen and then click "Execute". This
setting remains in effect for subsequent copy operations. To return to its original setting, uncheck the
"Fit to printable area" check box.
Note that if the "Fit to printable area" check box is checked, performance slows down.