FUJITSU M3091DC - Manual (Page 25)

2.3 Connecting Cables
This section explains how to connect the power cable and SCSI cable,
and how to install the drivers and software.
2.3.1 Precautions for connection
Fire, electric shock
- To mount or remove equipment, turn off the main unit, disconnect the power
plug from the outlet, and then follow the instructions.
- Use only the specified voltage. Do not use a multiple receptacle plug.
- Do not insert or disconnect the power cable and AC adapter with wet hands.
- With a dry cloth, wipe off any dust on the edges of the power cable or
mounting surface of the edges.
- Do not damage the power cable by putting heavy objects on it or pulling,
forcibly bending, twisting, or heating it.
- If the power cable or the outlet is damaged, do not use the cable.
Fire, electric shock, failure
- Insert the power cable fully and securely into the outlet.
- Disconnect the power cable by holding the plug to remove it from the outlet.
- Do not supply power to the scanner from the same outlet as a device, such as a
copy machine and shredder, which consumes a lot of power.