FUJITSU M3091DC - Manual (Page 21)

ÿ
2. Device Installation and Connection
Connect the image scanner to the PC.
Install and connect the scanner as described below: For the dimensions of the scanner, refer to Appendix
A, "Installation Specifications."
2.1 Prohibited Installation Locations
Note the following regarding installation location and environment.
- Fire, electric shock
E Since the M3091DC scanner contains high voltage components, do not
disassemble or modify it.
E When mounting or removing an optional device, turn off the main unit,
disconnect the power plug from the outlet, and then follow the instructions.
- Tipping over, falling
E Do not put the scanner on an unstable surface. Put the scanner on a flat
surface not affected by Vibration so that it rests evenly on the surface and so
that the rubber feet rest securely on the floor or desk surface.
E Do not put heavy objects on the scanner, and do not do work on the
scanner.
- Fire, electric shock
Do not put the scanner in direct sunlight or near a heater, or in a high-
humidity or dusty location. Use the scanner in a location with good air
circulation and ventilation.
- Fire
Do not cover vents. Doing so will cause the scanner to overheat.