FUJITSU M3091DC - Manual (Page 33)

3.2.2 Loading a document
This section explains how to load a document.
Preparing the document
Prepare the document for loading as follows:
- Take a stack of pages 4 mm. Hold the pages lightly with both hands and then bend them upwards in
the middle.
- While holding the pages firmly so that the beveling at both ends is preserved, flatten the bottom of
the stack. The stack will bulge so that air flows between the pages.
- Repeat the above action two to three times.
- Grasp the stack by the two remaining sides and riffle the paper again.
Arranging the edge
A document will be read better if the edge that is inserted is adjusted.