2 before scanning or copying a document, 1 checking the state of a document – FUJITSU M3091DC User Manual
Page 31

ÿ
- Fire, electric shock, failure
EMake sure that no liquids, such as coffee, or metallic objects, such as paper
clips, get into the scanner.
E Do not spray water on the scanner or allow it to become wet.
EIf foreign objects such as water, other liquids, or metallic objects fall into the
scanner, immediately disconnect the power plug from the outlet. Contact the
distributor (or maintenance service center). Extra care is especially required if
small children have access to the scanner.
EIf you will not be using the scanner for a long time, be sure to disconnect the
AC adapter from the outlet for safety reasons.
- Catching clothes
Be careful that sleeves, neckties, or hair is not caught in moving parts such
as gears and rollers.
- Damage
If you hear thunder nearby, disconnect the power cable from the outlet.
Failure to do so may damage the scanner or other equipment.
- Failures
To prevent malfunctioning, do not push too hard on the automatic paper
feed section or put heavy objects on it.
C Point
- Clean the scanner periodically as described in Section 4.3.2, "Cleaning the automatic paper feed
section."
3.2
Before Scanning or Copying a Document
This section explains required operations before scanning or copying a document.
Note that if a method other than those explained here are used, paper jams, read errors, other
malfunctions may occur.
3.2.1 Checking the state of a document
This section explains which documents can be read and which cannot.